What is the steel rate in Pune today (September 2026)?

For home construction the honest band is ₹46-63 per kg depending on grade and brand: mainstream Fe415/Fe500 quotes run ₹44-52/kg, and Fe500D - the grade for RCC frames - sits at ₹52-63/kg in our September 2026 dealer band. Per tonne, that is roughly ₹46,000-63,000. Steel is the most volatile line in a Pune bill of quantities - it moves weekly with national mill prices - so treat any single 'today' number older than a week as stale and re-quote the week you order.

What is the Kalika / Rajuri / Pushpa steel rate in Pune?

Kalika, Rajuri and Pushpa are the Pune-region mills people search by name because their dealer networks are dense around Pune, Pimpri-Chinchwad and Baramati. Kalika TMT has been quoting around ₹50-57/kg in recent weeks, with Rajuri and Pushpa in a similar band - typically ₹3-7/kg under the national premium brands for the same Fe500D grade. The saving is real but check two things: the IS 1786 mark on every bundle, and the manufacturer's test certificate for the lot you actually receive.

What is the Tata steel rate in Pune, and is the premium worth it?

Tata Tiscon and the other national premium brands (JSW Neosteel, SAIL) quote ₹55-63/kg for Fe500D in Pune - a ₹3-8/kg premium over the regional mills. On a 1,000 sqft G+1 home needing about 4,000 kg of steel, the whole premium is roughly ₹12,000-32,000 - real money, but small against the frame's total. Many Pune builders split: national brand for slabs and columns where bendability and consistency matter most, a trusted regional mill for footings and beams. Buy by the mill certificate, not the brand alone.

Is the steel rate quoted with GST or without?

Ask, always. Steel attracts 18% GST, and dealer quotes in Pune are inconsistent - some show ex-GST rates to look cheaper, then add it at billing. A ₹50/kg ex-GST quote bills at ₹59/kg. Compare quotes only on the same basis: landed, GST-inclusive, with freight and unloading stated. The 'with gst' line in most quotes is where the ₹4-8/kg difference between two 'competing' dealers actually hides.

How many kg of steel does a 1,000 sqft house need?

Rule-of-thumb for a standard-quality 1,000 sqft G+1 home: about 3.5-4.5 kg of steel per sqft of built-up area - roughly 3,500-4,500 kg (3.5-4.5 tonnes) across footings, columns, beams and slab. At ₹52-63/kg for Fe500D, budget ₹1.8-2.8 lakh for the steel package. Buy it in stage-wise lots like cement: footing steel at excavation, frame steel at plinth, slab steel with the slab drawings in hand.

Why do steel rates in Pune change so much week to week?

Steel is a national commodity before it is a local price: mill price revisions, raw-material (iron ore, coking coal) swings and quarterly demand cycles move the base price, and Pune's freight position adds its own layer. Unlike cement - which has been broadly flat through 2026 - steel can move ₹2-4/kg in a fortnight. Lock the rate in writing for your delivery window, same as cement, and never let a quote say 'prevailing rate'.

Guides · Materials · Steel

Steel rate in Pune today: what a kg of TMT actually costs.

Two dealers can quote ₹46/kg and ₹59/kg on the same afternoon and both be telling the truth - one is ex-GST Fe415, the other landed Fe500D. Here are the September 2026 per-kg and per-tonne bands for Pune, the brand map (Tata, Kalika, Rajuri, Pushpa), the GST line where comparisons go wrong, and the 3.5-4.5 kg/sqft number to plan against.

Cement rates (sister page)

Brand-wise per-bag bands for Pune - the other big material line.

Open →

Material estimator

Exact steel tonnage for your plot size and floors.

Open →

Cost calculator

Steel into the full-build picture, at today's rates.

Open →

Steel rate in Pune - September 2026 bands

Brand / grade	Per kg	≈ Per tonne	Notes
Tata Tiscon / JSW / SAIL (Fe500D)	₹55-63	₹55,000-63,000	National premium; best bendability & consistency for the frame
Kalika (Fe500D)	₹50-57	₹50,000-57,000	Pune-region mill, dense dealer network
Rajuri / Pushpa (Fe500D)	₹49-56	₹49,000-56,000	Local mills; ₹3-7 under national brands at the same grade
Mainstream Fe415 / Fe500	₹44-52	₹44,000-52,000	The lower quotes you'll see; check the grade before comparing
Market extremes (all grades/channels)	₹44-60+	₹44,000-60,000+	Full spread incl. premium 550D and odd-lot retail

Bands, not points, because steel has more spread than any other material on the bill: grade (415 vs 500 vs 500D), brand (national vs Pune-region mill), channel (dealer-direct vs retail counter) and GST treatment all move the number. The material prices guide carries the same Fe500D band with dated sources and a staleness flag. If a quote sits far below the band, ask which grade and which week it is from.

The GST line - where most comparisons go wrong

Steel carries 18% GST and Pune dealer quotes are inconsistent about showing it. A ₹50/kg ex-GST quote bills at ₹59/kg - which is why two "competing" dealers ₹4-8 apart can actually be the same price, and why a suspiciously low quote usually just hasn't added tax yet. Compare only like-for-like: landed, GST-inclusive, freight and unloading stated on paper. Then lock the rate in writing for the delivery window - steel is the most volatile line on the whole bill, and "prevailing rate at delivery" is an open cheque.

National brand or Pune-region mill?

Kalika, Rajuri and Pushpa are searched by name for a reason: their networks are dense around Pune, PCMC and Baramati, and at the same Fe500D grade they typically sit ₹3-7/kg under the national mills. The premium buys consistency and bendability at the rebar bender - which matters most on slabs and columns. A common Pune pattern: national brand for the slab and column steel, a trusted regional mill for footings and beams, saving ₹20,000-40,000 on a standard house without compromising the members that flex. Whatever you choose, every bundle carries an IS 1786 mark and you get the mill test certificate for the lot delivered - not a photocopy of some other lot.

How many kg of steel does a house need?

Rule-of-thumb for a standard-quality 1,000 sqft G+1 home: 3.5-4.5 kg per sqft of built-up area - about 3.5-4.5 tonnes across footings, columns, beams and slab. At the Fe500D band that is ₹1.8-2.8 lakh of steel, the second-biggest material line after cement. Get your exact tonnage from the material estimator, then buy stage-wise - footing steel at excavation, frame steel at plinth, slab steel only when the slab drawing is in hand - because the rate moves weekly and steel bought early is capital parked in a heap that rusts.